Advantages

FITS ANY SPACE

The Unico System uses less than one-third of the space in the built environment than a traditional system. It can deliver up to 9 tons of air conditioning in the same space as a 3-ton traditional unit.

QUIET PERFORMANCE

The supply tubing is designed to be as efficient as possible and also to minimize sound which brings decibels levels to the equivalent of a soft whisper. This is due to the nylon inner core and also the insulation, which absorb the sound created from the air.

LITTLE OR NO REMODELING

The Unico System fits where other conventional cooling and heating systems can't - with little or no remodeling required! The modular air handlers and coils can be easily installed into attics, ceilings, crawlspaces, and closets.

DRAFT FREE, EVEN TEMPERATURES

Through an air principle called aspiration, the Unico System air enters a room and creates a gentle suction around itself that draws the room air into its stream of air. Aspiration creates an even, draft free environment. This has the net affect of lowering the effective room temperature by 2 to 3 degrees.

REMOVES 30% MORE HUMIDITY

The Unico System provides greater humidity removal, up to 30%, with the superior and efficient design of our cooling coils, creating a perfectly comfortable environment. What this means for you is that you can have your thermostat set higher than you typically would, yet have the conditioned space feel as though your thermostat is set lower, saving you energy and money.

MATCHES ANY DECOR

The Unico System offers you a huge selection in outlet choices. Our outlets come round or slotted, and are designed to fit any décor or home architecture without compromise.

EFFICIENCY

The Unico System ductwork has 1/3 the surface area of conventional ducting so before it is even installed the Unico System ductwork has 1/3 less thermal loss. The supply tubing is also wrapped with insulation and an outer vapor barrier, which keeps nearly all of the thermal energy within the duct.

Warranty

Unico, Inc. manufactures the finest heating and cooling product available and is proud to offer the following Warranty program:

One Year: Our standard warranty on all Unico System parts and pieces is one full year from the date of installation.

Five Year: Unico, Inc. is pleased to extend our limited parts warranty for an additional four years when a Unico Preferred Contractor installs your system. The four year extension is applicable only to The Unico System serial numbered products.

Ten Year: When your system is installed by a Unico Preferred Contractor and registered within 90 days of install, Unico will extend the warranty for an additional five years. Giving you, the consumer, a Unico System 10-year Limited Parts Warranty. An installed system must include a blower and coil to qualify for this extended warranty.

**IMPORTANT NOTICE**

The Unico System is an AHRI listed and matched HVAC system designed to be installed by a qualified, licensed HVAC contractor per Unico’s installation instructions.

Many states and local jurisdictions have specific requirements for contractors to be trained and licensed before installing HVAC systems. Many local building codes require specific installation design, methodology permitting and testing before an HVAC system can be operated.

Unico recommends you select your qualified installing contractor before purchasing equipment so the contractor can assure the system is designed and sized correctly, matched to any auxiliary equipment and compliant with local codes and requirements.

Unico does not provide a warranty for equipment installations that are not performed by a licensed HVAC contractor.

Click here for help finding a Unico Preferred Contractor (UPC) in your area.

Brochures

• Homeowner Product Information Brochure
• Indoor Air Quality Guide
• A Better Way to Heat & Cool 

Videos